Skip to content

Effective Methods To Tell If A Diamond Is Real or Fake

Diamond Is Real or Fake

There are various types of fake diamonds that are so good in quality that you cannot differentiate them from the naked eye. In such cases, it is important to use other effective methods that can help to find out if a diamond is real or fake. 

Well, you guys are in luck. Here in this article, we will go through the effective methods to identify if a diamond is real or fake. Some of the methods are very simple and you can even try them in your home.

Using Black Light

Use a black light in order to carry out this examination. The only light that should be shining on the stone is the black light, therefore turn off all of the other lights in the room. It is quite unlikely that the stone in question is a diamond if it emits a light that is colored yellow, green, or even gray. 

If the stone emits a blue light, even a very dark blue light, then there is a greater possibility that the stone is indeed a diamond. Importantly, the results of this test are not definitive. Although the results of this test will provide a decent indicator, they should not be utilized to draw any solid conclusions.

Using Newspaper Test

Put the stone on a piece of newspaper to work with it. Examine the paper through the stone and make an effort to decipher what is written there. If the lettering can be read well, or even if it is somewhat unclear but can still be understood, then the stone is most likely an imitation diamond. 

Because genuine diamonds cause light to be refracted in a variety of ways, the inscription will not be able to be seen at all clearly. This is a really straightforward way to determine whether or not the diamond is real.

Using Dot Test

The newspaper test and the dot test are very comparable to one another. On a sheet of white paper, make a dot as tiny as possible. Position the stone so that it is sitting on top of this dot. Try to see the dot through the stone by looking through it. 

If you are able to see the spot on the stone, regardless of whether it is blurry or magnified, it is quite probable that the stone is not a genuine diamond. In the event that the dot is no longer visible, this indicates that the diamond reflects the light coming from the dot in a variety of directions. 

If this is the case, then it’s possible that it’s an actual diamond. Try one of these tests the next time you think you could be dealing with a perfect replica of an expensive diamond to determine whether or not the stone in question is genuine.

Using A Loupe

The vast majority of people do not own a loupe. Jewelers are the most common people that utilize loupes. It is essentially a strong magnifying glass that does not have a handle attached to it. The examination of diamonds may be accomplished in a manner that is very similar to that of inspecting objects via the lens of a magnifying glass. 

Examine the inclusions very carefully. When comparing genuine diamonds to imitation diamonds, the presence of inclusions is an important factor. If there are no visible inclusions, the stone is most likely a fake.

Using Water

This test is quite simple, but it will provide somewhat accurate results in a very short amount of time. A glass should be filled with water. This might be any kind of water, including water that is freshly drawn from the tap. Get the stone, then drop it into the glass. 

The test is really straightforward: because of the high density of a genuine diamond, the stone in question, if there is even a remote probability that it is a diamond, will fall to the bottom of the container. If the stone rises to the top or even just a little bit, this is a strong indication that the diamond is not real and should be disregarded.

Using A Magnifying Glass

Using a magnifying lens is yet another technique for determining whether or not a stone contains genuine diamonds. Keep the stone in question in your hand while you examine its inside with as much attention as possible. The fact that practically every diamond has flaws is an intriguing fact to take into account. Inclusions are another name for these types of blemishes.

There are certain diamonds that have no inclusions or almost no imperfections at all. These diamonds are often created in a laboratory, but if they aren’t, they are very uncommon and, as a result, quite costly. The production of diamonds is a complex process, in case you were wondering how they are manufactured. 

If there are no inclusions or flaws on the inside of the stone, there is a good probability that it is not a genuine diamond. In the event that there are flaws or inclusions, there is an increased possibility that it is, in fact, a genuine diamond.

Using Heating Method

Since diamonds are among the stones with the highest possible quality, they are capable of enduring changes in temperature with very little impact. A stone is not a genuine diamond if it fractures or splitters when subjected to changes in temperature, as well as if it cannot withstand these changes. 

The procedure for the test is quite easy to follow. Because the stone has to be heated to a very high temperature, you will require a set of forceps. Place the stone in the center of a pair of forceps and hold it there. Maintain the flame beneath the stone for about forty seconds using the cigarette lighter. 

The stone will heat up to a very high temperature. At this point, using the forceps, lower the stone into the water that is chilled in the glass. Real diamonds may be identified by the fact that they will shatter when dropped.